 Overview
With our diverse standard and high performance pumps gear pump range we are able
to serve all your needs and response to any challenge.
Our gear pumps are robust, self-priming and
have running
dry capability.
On demand, we provide as well pumps which are API, ATEX and TA Luft
compliant
| pressure |
up to 120 bar |
suction heights |
up to 8 m |
| flow rated |
from 0,05 to 25.000 l/min. |
viskosity |
from 0,6 to 260.000 mPas |
| |
from 0,003 to 900 m3/h |
temperature |
from -60°C to 320°C |
GEAR PUMP Range & Features
ADVANTAGES
& HIGHLIGHTS
Zeilfelder gear pumps are specially designed for*:
- complex and difficult challenges
- dosing (repeat accuracy > 99 %)
- pressure up to 120 bar
- suction heights up to 8 m
- flow rates from 0,05 to 15.000 l/min.
- viscosity from 0,6 to 260.000 mPas
- temperature from -60°C to 320°C
- explosive und toxic substance
Advantages*:
- Pumps out of all possible materials
- high durability through high-end bearings and special coatings
- low energy consumption and high efficiency up to h = 92 % through:
- lowest manufacturing tolerance
- special design
- interchangeable thrust segments (axial bearings)
- dry running capability
- nearly pulsation free at different viscosities
- higher displacement/revolution
- lower rotation speed
- gentle pumping
- revolution speed adapted to medium
- dual rotation direction
- reduced noise level
- no valves
Optional:
- packing glands
- simple acting mechanical seal
- double acting mechanical seal
- hermetic capsuled with Magnetic drive (direct or indirect)
- explosion proof
- heating jacket (for water, steam or heating oil)
- minimal surface roughness down to 4µ through electropolishing
- API, ATEX and TA Luft compliant
*depending on the pump type and serie
|
|
